Cam Gear Retaining Tool J-35652-A for Detroit Diesel Engines 60 Series M30116

Description

Specifications:
【Perfect Fitment】This camshaft drive gear torque holding tool fits for detroit diesel 60 series engines.
【Function】Used to correctly retain the cam device without damage when you remove and install the cam gear fixing bolts.
【Direct Replacement】This is a direct replacement for part number J-35652-A.
【Specially Design】Designed install to gear case and engage the lightening holes in the camshaft drive gear.
【100% Satisfaction Guarantee】If you're not 100% satisfied with this Cam Gear Retaining Tool, simply return it for a full refund in 60 days.
Direct Replacement:
This is a direct replacement for part number J-35652-A.
Specially Design:
Designed install to gear case and engage the lightening holes in the camshaft drive gear.
Perfect Fitment:
This camshaft drive gear torque holding tool fits for detroit diesel 60 series engines.
Function:
Used to correctly retain the cam device without damage when you remove and install the cam gear fixing bolts.
Installation of Camshaft Drive Gear Torque Holding Tool:
1. Insert the shoe of the camshaft drive gear torque holding tool J-35652-A, through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool J-35652-A to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case cover.
4. Using a long 3/4 in. drive breaker bar and a 27 mm impact socket, remove the camshaft drive gear mounting bolt. Discard the bolt.
5. Remove camshaft drive gear torque holding tool J-35652-A from the gear case cover.
6. Insert a clean shop towel into the gear case opening to prevent removed bolts from falling in to the gear case.
Notic:
Do not allow bolts or the shop towel to fall into the gear case. Failure to remove loose bolts or the shop towel from the gearcase may result in severe gear train damage at engine startup.
7. Remove the three (current) or two (former) camshaft thrust plate mounting bolts carefully to avoid dropping them into the gear case.
Package Includes:
1x Cam Gear Retaining Tool
Payment
Delivery details
Terms of sales
Contact us
Payment
1.All Payments must be Confirmed (Shipping and billing addresses must match) Payment is required within 7 days from the date of the auction ending.
2.We accept PayPal, MasterCard, Visa, American Express, Discover and etc payment.
Delivery details
1.Orders will be ship out within 1 business days after payment has cleared. (Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. )
2.All of the items are shipped from our Warehouse in USA.United states 2-5(days)
3.Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description.
Terms of sales
1.100% Satisfaction Guarantee: If you're not 100% satisfied with babylu33 items, simply return it for a full refund in 60 days (Items must be in new condition and in original package). Kindly please feel free to contact us before return.
2.Return or Replacements: Support 12 months' Warranty. All product will be tested in 100% before delivery. If the item is was damaged in transit, kindly please contact us for a replacement or refund (Excluding contrived damage or misuse).
Contact us
Any question, please don’t hesitate to let us know. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. your understanding and patience is much appreciated!